Micro Mist Spray Dryer for Laboratory

MDL Micro Mist Spray Dryer

Few microns fine powder for research can be attained easily by using MDL series. We have various types to meet your demands.

Features

  • Powders can be attained from a little specimen.
  • Spray drying state can be checked by its glass chamber.
  • Simple disassembly and setup. Easy cleaning.
  • Easy to handle and check operation by the touch panel.

What is micro mist spray dryer?

  • Spray dryer is a device that instantly dries the atomized droplet by the hot air and making them into a powder.
  • Atomized droplet is called "spray" if the diameter is over 10µm, and the one with diameter below 10µμm is called "mist".
  • The device that stores "four-fluid nozzle" which can atomize massive "mists" is called "micro mist spray dryer".

Basic specification

  • Water evaporation capacity: 3Kg/h
  • Atomizing method: four-fluid nozzle, straight edge
  • Drying method: Upper part hot air co-current type
  • Exhaust fan: inverter controlled, maximum 1.5m3/min
  • Hot air generator: electric heater 4kw
  • Hot air temperature: 40°C to 200°C, temperature control accuracy of ±1°C
  • Solution sending pump: roller pump, maximum 50ml/min

Features of micro mist spray dryer

  • High-capacity production of few microns fine powder is possible.
  • Short residence time inside the product, and its structure can be smaller.
  • Good heat efficiency by setting the exhaust temperature low.
  • Can get rid of pulverizing and classifying process.
  • Drying the liquid material, that is difficult to get dried, is possible.
  • Low temperature drying is possible below boiling point.
  • Smoothly planning of research to production is possible.

Simple type that collects by the bag filter at the bottom.

** Specification **

Collecting method:
Collect by bag filter at the bottom of the drying chamber

*You can change this into C or M type.

Experimenting by cyclone type collecting method

** Specification **

Collecting method:
Collecting by cyclone type + bag filter

*You can change this into B or M type.

Continuous collecting type by the bag filter unit

** Specification **

Collecting method:
Collecting by cyclone type + bag filter
with backwash.

*You can change this into B or C type.

Used as high-value added low-capacity production machine.

GMP-compliant.

** Specification **

Collecting method:
Collecting by the bag filter at the bottom of the drying chamber

Drying chamber:
Stainless steel, sight glass

Drying hot air goes through HEPA filter.

Body is made of stainless steel.
Copyright: Fujisaki Electric Co., Ltd.