Micro Mist Spray Dryer for Laboratory
GMP compliant Spray Dryer for Laboratory
MDL-015G
-
Can produce single micron particles using Four Fluid Nozzle spray drying
-
Very fine and uniform powder can be produced from a small quantity
-
Simple touch panel control system to display flow diagram with run/stop operating conditions of all equipment
-
Newly developed high-efficiency cyclone to collect single micron product
- GMP compliant
- Clean hot air to be supplied for drying through HEPA filter
- Easy to clean, disassemble and reassemble using sanitary pipe and finishing.
Specifications
| Evaporation | 3 kg//h |
| Atomizing device | Four-fluid nozzle |
| Hot air temperature | Max 200°C (392°F) |
| Hot air volume | Max 0.4 m3/min (valuable) |
| Hot air generator | Electric heater 2kW |
| Hot air intake | Through HEPA filter |
| Liquid feed speed | Max 15ml/min |
| Nozzle Air | 40liter/min 20 degree 0.6MPa |
| Collecting method | Cyclone + Bag filter |
Options
There is an option available for closed type.
- Spray drying with solvent is possible using totally enclosed solvent recovery unit.
- Methyl chlorides can be used as solvent by using 40 below zero degree C (F) recirculating gas.?
The above photo shows MDL-015G with Solvent Recovery Unit MSR-005 (on the left)
